PROEL DB2A
- Brand: PROEL
- Product Code: DB2A
- Condition: NUOVO
- EAN: 8032496455691
- Availability: ARTICLE IN REASSORTMENT
ACTIVE 2-CHANNEL D.I. BOX
D.I.
Boxes (Direct Injection Boxes) are part of the essential set of tools
required for any professional live sound situation or any application
where the audio devices feature diff erent levels, impedance and
connections. Transforming audio signals from unbalanced to balanced,
D.I. Boxes reduce the possibility of electrical disturbances on the line
- especially over long cable runs such as from a musical instrument to
the FoH mixing console. The DB series includes three diff erent models
of high-performance D.I. boxes: a single channel active (DB1A), a single
channel passive (DB1P) and a dual channel active (DB2A). The circuitry
of each model has been designed with the maximum care, using carefully
selected electronic components, such as isolation transformers (DB1A,
DB1P) and low-distortion ICs. This guarantees a clean, hum-free signal
transmission from the instrument to the mixing consoles, even on very
long cables, without impedance matching problems. On the front panels, a
wide choice of connectors is available (XLR, JACK and RCA, depending on
the model), allowing easy connection from a wide range of sources,
including keyboards and samplers, guitars and basses, PC audio cards and
any type of music player. The ACTIVE versions can be powered by 48 V
phantom power from the mixing console, by a 9 V battery or, in large
applications using many DI BOXES, by an external 9 V power adapter that
can be daisy-chained using the double power connector on the rear panel.
The innovative mechanical design of the three models includes an
aluminum shell and rubber corners, which provide maximum protection in
the toughest situations. When the two rubber corners are removed, two
guides are exposed, allowing the coupling of two DI units, which can
then be mounted in a 19” standard rack (rack ears included). This unique
feature is extremely convenient for engineers who need to use a large
number of DI BOXES in the same application.
- RACK mountable - STEREO configuration: one unit can be used for a stereo device
- High dynamic headroom with minimum phase and harmonic distortion
- High input impedance reduces loading
- Very good electronic performance thanks to SMD components and low noise IC
- Very efficient ground lift circuitry
- JACK, RCA and XLR connectors with link possibility
- All the connections on the same side
- -20 dB, -30 dB PAD
- Powering options: 9V battery, +48V, external AC/DC adaptor supply
Input Section
Input Impedance: 200K Ohm (pad at 0 dB), 47k Ohm (pad at -20 dB), 47k Ohm (pad at -40 dB)
Max Input Level: +5 dBu (pad at 0 dB), +25 dBu (pad at -20 dB), +35 dBu (pad at -30 dB)
Connectors: 2 x 1/4" jack + 1 x RCA (unbalanced)
Output Section
Output: Active discrete devices (transformer less)
Max. Output Level: into 600 Ohms or greater, +5 dBu (for 0.1% THD at 50 Hz), +5 dBu (for 0.1% THD at 1k Hz)
Connector: XLR-M
System Performance
Insertion loss: < 1 dB
CMR: > 50 dB
Phase distortion: +20° at 20 Hz, -30° at 20k Hz
Distortion (THD 20-20k Hz 0dBu): < 0.007 %
Noise: < -105 dBu unweighted
Frequency Response: 10 Hz to 40 kHz, +0dB/-1 dB
General
Controls: On/off, Pad -20, Pad -30, Gnd Lift.
Indicators: On
Phantom Power: +24 volts DC to +48 volts DC
AC/DC adaptor: +12 volts DC
Standalone/Standby: 9 volt PP3 type battery
Current consumption: less than 16 mA
Dimensions (WxHxD): 215 x 50 x 125 mm
Weight: 1.06 kg (2.34 lb)
Tags:
PROEL DB2A,
DB2A,
Keyboard Accessories